Compression Testing Machine Hand Operated (Pillar Type)
Model No.: SET-1135
Standards:
The Civil Lab Equipment Manufacturer range of Compression Testing Machine Hand Operated are one of the most superior of their types. Their robust construction and simplicity make them extremely easy to use by anyone not having technical knowledge.
The machine comes with a only loading unit which is welded fully. There are four pillars constructed that are crosshead in a seated platen which is spherical. The lower platen is affixed to the piston on its top. The capacity of loading is approximately 2000 KN and using proper spacers cubes upto 200mm along with cylinders of 300 mm Height X 150 mm Dia can be tested. Useful for mobile laboratories and remote locations, the machine also comes equipped with a protective housingalong with protective 200mm dia load gauge.
This is a brass tube approximately 53cm long and 2.8cm I.D. with a wooden handle. Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia. is drilled on the tube near handle. Total sample collected at one time is 300 cm approximately.
This is a brass tube approximately 53cm long and 2.8cm I.D. with a wooden handle. Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia. is drilled on the tube near handle. Total sample collected at one time is 300 cm approximately.