Cylindrical Mould

Model No.: SET-1119

Standards:
IS 7535 1986 ASTM C 183 AASHTO T 127

Civil Lab Equipment Manufacturer Cylindrical Mould is manufacturers as per the industry defined standards. Tamping Rod are the commonly required in the laboratory.

The cylindrical mould is split vertically into two parts. The mean internal diameter in within +/-0.2mm and height is within +/-1mm. The ends are machined to +/-0.05 . The base plate and top plate are machined flat to +/-0.03mm.

A Mould cylinder, cast iron, 150mm dia x 150mm height.
B Mould cylinder, cast iron, 150mm dia x 300mm height.
C Mould cylinder, cast iron, 160mm dia x 320mm height.
D Mould cylinder, cast iron, 100mm dia x 200mm height.
E Mould cylinder, cast iron, 300mm dia x 600mm height

 
 
Concrete Testing Lab Equipment

Orimet Test Apapratus

Fill Box Apparatus

Vee Bee Consistometer Test

Concrete Slump Test Equipment

Ball Penetration Apparatus(Kelley Ball)

Compaction Factor Apparatus
Initial Surface Absorption Test Apparatus

Concrete Pocket Penetrometer

Spring Penetrometer

Bleeding Of Freshly Mixed Concrete

Tamping Rod

Tamping Bar

Straight Edge

Peak Load Indicators Manufacturer
Curing Tank

Concrete Vibrating Table

DLC Vibrating Hammer

Portable Handy Concrete Poker Vibrator

Lateral Extensometer
Longitudinal Compressometer

Sand Absorption Cone And Tamper

Density Of Fresh And Hardened Concrete

B Type Air Entrainment Meter

Air Entrainment Meter
Insulator Testing Machine

Fully Automatic Mortar Mixer Machine

Mortar Mixer Machine

Concrete Rebound Hammer Tester

Laboratory Mixer Pan Type With Extra Drum And Trolly ( Detachable Pan )