J-Ring Test, Narrow Gap

Model No.: SET-1001

Standards:
EN 12350-12

Civil Lab Equipment Manufacturer J-Ring Test, Narrow Gap with model is manufacturers as per the industry defined EN 12350-12 standards. J-Ring Test, Narrow Gap are the commonly required in the laboratory.

The J-Ring test is used for determining the passing ability, the flow spread and the flow time of self compacting concrete as the concrete flows through the JRing apparatus. The J-Ring narrow gap with ΓΈ18 mm x 16 smooth bars is manufactured from stainless steel.

The Slump Cone is made from sheet steel protected against corrosion, with diameters; top 100 mm, base 200 mm and with a height of 300 mm. The Base plate is 900x900x3 mm square, made of stainless steel with engraved circles of 200 mm and 500 mm diameter conforming to EN 12350- 8. The Steel weighted collar is used to stabilize the slump cone on J-Ring or slump flow tests.

Minimum apparatus for the J-Ring test are J-Ring with narrow gap and slump cone.
J-Ring, narrow gap
Slump cone for J-Ring
Base plate for J-Ring and slump-flow tests
Steel weighted collar, 9 kg
EN 12350-8 for slump cone on J-Ring or slump flow test

Concrete Testing Lab Equipment

Vee Bee Consistometer Test

Concrete Slump Test Equipment

Kelley Ball Penetration Apparatus

Compaction Factor Apparatus
Initial Surface Absorption Test Apparatus

Pocket Concrete Penetrometer

Mortar Penetrometer

Bleeding Of Freshly Mixed Concrete

Tamping Rod

Tamping Bar

Straight Edge

Curing Tank

Concrete Vibrating Table

DLC Vibrating Hammer

Portable Handy Concrete Poker Vibrator

Lateral Extensometer
Longitudinal Compressometer

Sand Absorption Cone And Tamper

Density Of Fresh And Hardened Concrete

B Type Air Entrainment Meter

Air Entrainment Meter
error: Content is protected !!