Automatic Soil Compactor

Model No.: SET-1215

Standards:
BS 1377:4

The Automatic Soil Compactor manufactured and suppliers by Civil Lab Equipment Manufacturer is fabricated to dispense a fully automatic and regular compaction of standard changed and the specimens of CBR for assuring the conformity with the reference standard. The Civil Lab Equipment Manufacturer’s Soil Compactor automatically compacts the soil specimens and help in eliminating the efforts involved with hand compaction.

Thee equipment comes equipped with the programmable digital counter which enables the machine to stop when the number of blows is preset. To suit the requirements, the rammers height as well as the weight can be adjusted. The drop weight can be adjusted to approx 300 mm, while the drop height can be adjusted to the 450 mm. The rammer is circular faced with is 50 mm diameter and is adjustable to 2.5 kg. or 4.5 kg as required.

The compactor also features automatic blow pattern which allows for the compaction of each layer as the rammer moves along the mould. The mould is rotated by the table in measured steps, where the quantity of the blows is set during initial stage of the test by the digital counter. The Automatic Soil Compactor also comes fitted with the in-out distribution along with the user defined blow number. A CBR switch/standard proctor along with the stop and start push buttons for any emergency are placed near the blow counter.

 
 
Geotechnical Testing Lab Equipment

Plastic Limit Set

Shrinkage Limit Set

Linear Shrinkage Mould

High Speed Stirrer

Grain Size Analysis (Pipette Method)
Particle Size Sedimentation (Hydrometer Method)

Soil Hydrometer

Sand Equivalent Test Set

Methylene Blue Test Set

Motorised Sand Equivalent Shaker
Plummet Balance

Proctor Needles (Spring Type)

Pocket Pentrometer

Vicksberg Pentrometer (Proving Ring Type)
Dynamic Cone Penetrometer

Speedy Moisture Meter

Rapid Moisture Meter

Infrared Moisture Meter

Sand Density Cone Apparatus

Core Cutter

Unconfined Compression Tester (Motorised)

Digital Triaxial Shear Test

Swell Test Apparatus

Auger Posthole Type

Pycnometers

Density Bottle

Standard Penetration Test

Plate Bearing Test
Integral Proving Rings

G. I. Frame Sieves 300 and 450 mm dia (Powder Coated)

Brass frame sieves 100, 200, 300 and 450 mm dia.

Point Load Test

Digital Point Load Test
Hydraulic Jack