Sand Pouring Cylinder – BS

Model No.: SET-1223 (A)

Standards:
IS 7535 1986 ASTM C 183 AASHTO T 127

At Civil Lab Equipment Manufacturer, we manufacture, suppliers and exporterssand pouring cylinder apparatusof best quality to our clients in Delhi, India.Civil Lab Equipment manufacturerssand pouring cylinder apparatus is basically used for the in-place determination of the dry density of the compact or natural, medium, and line grained soils. Civil lab can be used for the soils whose layers do not exceed the thickness of approx. 500 mm sand pouring cylinder apparatus can also be used to measure the density of the base materials of the ground, a circular hole is dug, from which all of the soil collectedthen driedand weighted. SE-Test post which the hole is filled back with the uniform standard soil or a fine gravel, that is poured from the calibrated container to calculate the volume of the hole. Sand pouring cylinder apparatusis fitted with a shutter and conical funnel, metal tray with the central hole, and a Cylindrical Calibration Container.

At Civil Lab Equipment Manufactureris used Sand apparatus for the in place determination of the dry density of compact, line and medium grained soils and for layers not exceeding 500mm thickness. At Civil Lab apparatus consists one each of Small sand pouring cylinder, 3 litre capacity fitted with conical funnel and shutter.

Specifications: The Sand Pouring Cylinder from SE-Test Laboratories consists of the following:

  • One 3 litres capacity small sand pouring cylinder fitted with the conical funnel and shutter.
  • A cylindrical calibrating container of internal dia of 100 mm and 150 mm height, fitted with a flange.
  • A metal tray of 30 cm square shaped and deep up to 4 cm with a hole in the center of 10 cm dia.
  • Metal tray, 300mm square and 40mm deep with hole.
                                                                                                                 
SizeDiameter of cylinderHeight of CylinderCapacity of CylinderDiameter of ContainerHeight of Container Size of Tray
Small115380mm3 Liters100mm150mm 300x300x40mm
Medium165510mm9 Liters150mm200mm 380x380x45mm
Large215610mm16.5 Liters200mm250mm 450x450x50mm

Soil Testing Lab Equipment

Plastic Limit Set

Shrinkage Limit Set

Linear Shrinkage Mould

High Speed Stirrer

Grain Size Analysis (Pipette Method)
Particle Size Sedimentation (Hydrometer Method)

Soil Hydrometer

Sand Equivalent Test Set

Methylene Blue Test Set

Motorised Sand Equivalent Shaker
Plummet Balance

Proctor Needles (Spring Type)

Pocket Pentrometer

Vicksberg Pentrometer (Proving Ring Type)
Dynamic Cone Penetrometer

Speedy Moisture Meter

Rapid Moisture Meter

Infrared Moisture Meter

Sand Density Cone Apparatus

Core Cutter

Unconfined Compression Tester (Motorised)

Digital Triaxial Shear Test

Swell Test Apparatus

Auger Posthole Type

Pycnometers

Density Bottle

Standard Penetration Test

Plate Bearing Test
Integral Proving Rings

G. I. Frame Sieves 300 and 450 mm dia (Powder Coated)

Brass frame sieves 100, 200, 300 and 450 mm dia.

Point Load Test

Digital Point Load Test
error: Content is protected !!