Civil Lab Equipment Manufacturers introduces itself as one of the leading manufacturers and providers of Plate Bearing Test equipment based in India. We make available the Plate Bearing Test Apparatus in diverse specifications as per the requirement of our clients. ThePlate Bearing Test equipment is used for the purpose of soil testing. Mainly it is used for estimating the bearing capacity of the shallow foundations for ensuring proper designing of the flexible pavement. During the test process a steel plate is goes through the increasing load along with the settlements of the recorded plates. One the load wherein the plate starts sinking rapidly, it is then the maximum bearing capacity is noted.

• Helps in determining of the bearing capacity of the in-situ soil
• Designing for the static loads on the spread footings
• Repetitive as well as non-repetitive plate loading tests of soils along with the flexible pavements

• 50 tonne double acting hydraulic jack with separate pumping unit fixed to it a 0 – 500KN x 0.5KN. : 1 Set.
• Pressure gauge along with a flexible metal pipe 5mtr.: 1 Nos.
• Positioning the dial gauge plunger – 4 Nos
• Special ball and socket arrangement between the jack and the bearing plate: 16 Nos.
• Top end plate, 50mm, dia with male thread for fitting onto the extension rods and positioning the dial gauge plunger : 4 Nos.
• Column 15cm dia x 25cm long with flanges complete with four bolts and nuts : 2 Nos.
• Column 15cm dia x 50cm long with flanges complete with four bolts and nuts : 1 No.
• Extension rod 12MM. dia x 25cm long for taking dial gauge readings – 16 nos.
• Magnetic base along with the female thread on the top for the purpose of holding extension rod – 4 nos.
• Bridge support of welded steel angle construction, 5 mtr. Span and stands approximately 30 cm. High. Fitted with two quick release clamps a for positioning and holding the dial bracket : 2 Nos.
• Plane M.S. plate 60cms x 60cm .
• Square x 60 cms. Square x 25mm thick.
• Plane M.S. plate 45cm x 45cm x square x 25mm thick.
• Plane M.S. plate 30 cms x 30 cms x 25mm
• thick. Dial Gauge 0.01mm x 25mm – 4 Nos.

• Plane M.S. 75mm x 25mm thick
• Plane M.S. 50cm x 25mm thick
• Grooved M.S. plate 60cms x 60cms x 25mm thick
• Grooved M.S. plate 45cms x 45cms x 25mm thick
• Grooved M.S. plate 30cms x 30cms x 25mm thick
• Grooved M.S. plate 75cms x 75cms x 25mm thick