Digital Marshall Stability Test Apparatus

Model No.: SET-1001

Standards:
IS 7535 1986 ASTM C 183 AASHTO T 127

Civil Lab Equipment Manufacturer is a leading manufacturer and supplier of Digital Marshall Stability Test Apparatus. The machine is priced reasonably and has been manufactured in sync with international quality standards. Our range of test apparatus offers excellent performance and meets the requirements of the clients quite perfectly.

The Marshall Stability Test Equipment is mainly used for determining the stability of the bituminous samples that are used by contractors, laboratories and government agencies. The equipment is specifically designed to measure the resistance of the plastic flow of the cylindrical specimen for the bituminous paving of the loaded mixture on a flat surface.

The test samples and made available and is tested at a speed which is approximately 50.8mm/mi. The highest load (stability) along with the deformation, i.e. flow, of the sample is recorded. Normally, the test is suitable for hot mixing designs with the help of maximum size bitumen and aggregate of highest size, i.e. 25mm. The machine is specifically used for the purpose of evaluating and fabricating the bituminous paving mixes.

  • Robust construction
  • 50KN capacity
  • Rate of travel 50.8mm/min
  • Safety cut-off switch
  • Precise speed
  • Limit switch protection for movement (upward and downward)
  • Single speed, bench top load frame
  • Geared screw jack and motor drive
  • Maximum loading capacity of 50 kN

It consists of body housing, a geared screw jack and motor drive mechanism suitable for operation on 230 V, 50Hz, Single Phase, A.C. supply.

A. MARSHALL LOAD FRAME 1 No.
B. Breaking Head Stability Mould, with a dial gauge ( having 25mm travel and 0.01mm least count), for flow measurement 1 No.
C. Compaction Mould, Steel cylindrical 3 Nos.
D. Base Plate 3 Nos.
E. Extension Collar 3 Nos.
F. Compaction Pedestal, Manual Operation, Comprising a steel plate capped on a wooden post. A Mould Clamp is fitted to the top of the plate . 1 No.
G. Compaction Hammer, satisfies BS 598. The hammer has a 4535 g sliding weight with a free fall of 457 mm 2 Nos.
H. Load Transfer Bar 1 No.
I. Paper Discs, Non absorbent, 11 cm diameter pack of 100 No. 1 Pkt.

error: Content is protected !!