In-Situ Vane Shear Test

Model No.: SET-1243

Standards:
IS 4434-1967

At Civil Lab Equipment Manufacturer, we manufacture, supply and export In Situ Vane Shear Test of best quality to our clients in Delhi, India. Civil Lab Equipment Manufacturer, The situ vane shear test apparatus is designed for conducting from bottom of a bore hole in saturated cohesive deposits for determining their in place shearing resistance.

In situ vane shear test equipment consists of a torque applicator assembly mounted on a base, a gear wheel, which is marked in degrees, holds a torque ring geared to a crank and the torque ring is a split ring and deforms as applied and the deformation is indicated by a dial gauge. In situ calibration chart to convert dial gauge readings to torque force in kgs/cm2 is supplied.

Se-Test registering the rotations of the vane, a detachable stand is provided to anchor the instrument an attachment to securely hold the string of rods is provided the equipments comprises of the followin . In situ torque applicator assembly capacity 2000kg/cm2 with split proving ring and dial gauge 0.002 x 5mm complete with stand.

>
Vane ( with vane rod ) 37.5mm dia x 75mm high No. 1
Vane ( with vane rod ) 50.0mm dia x 100mm high No. 1
Torque rod ( square cross section) 0.6mts long No. 1
Rods quick couplind type, 1 mtr. long No. 1
Rods quick coupling type, 1 ½ mtr. long No. 1
Dummy rod, corresponding to 37.5mm dia vane No. 1
Dummy rod , corresponding to 50.0mm dia vane No. 1
Soil Testing Lab Equipment

Plastic Limit Set

Shrinkage Limit Set

Linear Shrinkage Mould

High Speed Stirrer

Grain Size Analysis (Pipette Method)
Particle Size Sedimentation (Hydrometer Method)

Soil Hydrometer

Sand Equivalent Test Set

Methylene Blue Test Set

Motorised Sand Equivalent Shaker
Plummet Balance

Proctor Needles (Spring Type)

Pocket Pentrometer

Vicksberg Pentrometer (Proving Ring Type)
Dynamic Cone Penetrometer

Speedy Moisture Meter

Rapid Moisture Meter

Infrared Moisture Meter

Sand Density Cone Apparatus

Core Cutter

Unconfined Compression Tester (Motorised)

Digital Triaxial Shear Test

Swell Test Apparatus

Auger Posthole Type

Pycnometers

Density Bottle

Standard Penetration Test

Plate Bearing Test
Integral Proving Rings

G. I. Frame Sieves 300 and 450 mm dia (Powder Coated)

Brass frame sieves 100, 200, 300 and 450 mm dia.

Point Load Test

Digital Point Load Test
error: Content is protected !!